Amano CP-5000 Operations Manual download pdf (Page 61)

CP-5000 User’s Guide 6-15

Signal Test (Menu 8, Item 6)

1. If you have not already done so, enter the

Program Mode and press the Function key until

the LED Test menu item appears in the display.

2. Press the Change key five times. The Signal

Test menu item will appear in the display.

3. Press the Enter key to select and start the test.

The test number will cease to flash in the display

and you will hear a clicking sound as the relay

contacts open and close.

4. Press the Enter key to stop the test. A beep will

sound and the test number will flash in the

display.

5. Press the Change key twice to move to the next

test or exit the Diagnostics Menu by pressing the

Function key, or by exiting the Program Mode.

Motor Test (Menu 8, Item 7)

1. If you have not already done so, enter the

Program Mode and press the Function key until

the LED Test menu item appears in the display.

2. Press the Change key six times. The Motor Test

Number menu item will appear in the display.

3. Press the Enter key to select and start the test.

The test number will cease to flash in the display and you will hear

the sounds of the motor whirring. The cycle completes in a few

seconds.

4. Press the Enter key to complete the test. A beep will sound and the

test number will flash in the display.

5. Press the Change key to move to the next test or

exit the Diagnostics menu by pressing the

Function key, or by exiting the Program Mode.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 67 68

No comments

Amano CP-5000 Operations Manual Page 61