Amano CP-5000 Operations Manual download pdf (Page 36)

4-14 CP-5000 User’s Guide

15. When the desired value appears, press the Enter

key. When saved, the next menu item, Index No.

Imprint, will appear in the display.

Index Number Imprint (Menu 4, Item 8)

This menu item is used to identify individual time clocks by printing a

time clock-assigned code number onto the time card. The Index Number

may be any number between 01 through 99.

Note: To disable the Index Number Imprint, enter “00”.

1. Enter the Program Mode and press the Function

key until the Index No. Imprint menu item appears

in the display.

2. Press the Change key to select a value of 00 thru 99 that will be

used to identify this time clock on a time card.

3. When the desired value appears, press the Enter key. The display

will automatically move to the Signal Duration menu item.

Signal Duration (Menu 5, Item 1)

This selection is used to set the duration (in seconds) that the relay

contacts of the installed signal device will be closed. It also defines the

time the internal buzzer will sound.

1. Enter the Program Mode and press the Function

key until the Signal Duration menu item appears in

the display.

2. Press the Change key to select a duration of one to fifteen seconds

that relay contacts of the signal device will be closed.

Note: While setting a one second duration is possible, it is not

recommended.

3. When the desired value appears, press the Enter key. The display

will automatically move to the Weekly Programming menu item.

4. Exit the Program Mode by re-installing the top cover, which

automatically switches the unit to Normal Mode.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 67 68

No comments

Amano CP-5000 Operations Manual Page 36