Amano CP-5000 Operations Manual download pdf (Page 29)

CP-5000 User’s Guide 4-7

2. Press the Change key until the correct two digit

year (00 thru 50) is flashing in the display.

Holding down the Change key for more than

three seconds will increment the number in the

display by ten.

3. When the correct year appears, press the Enter

key. The display will automatically move to the

Month and Date menu item. The first pair of

digits (month) will flash in the display.

4. Press the Change key until the correct month number (01 thru 12)

appears in the display, then press the Enter key.

5. The next set of digits, the Date of the Month, will

flash in the display.

6. Press the Change key until the correct date of the month (01 thru

31) appears in the display, then press the Enter key.

7. The year, month, and date entered will flash

in the display (seen here: July 27, 2007). To

edit these settings, press the Change key.

This will return you to the display described

in step 1. To save these settings, press the

Enter key.

8. When the year, month and date are saved, the

next menu item, Hours and Minutes will appear

in the display.

Note: After saving the date, the LED indicator on the front panel will

automatically indicate the correct day of the week when returning

to Normal Mode.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 67 68

No comments

Amano CP-5000 Operations Manual Page 29