Amano CP-5000 Operations Manual download pdf (Page 57)

CP-5000 User’s Guide 6-11

Diagnostics (Menu 8)

The Diagnostics Menu is used to run specific diagnostic routines for

troubleshooting and determining the condition of your CP-5000.

The Diagnostics menu is accessed by entering the Program Mode, and

pressing the Function key until the LED Test (Menu 8, Item 1) appears

in the display and the last LED indicator is illuminated.

The general guidelines for the Diagnostics Menu are as follows:

• Each test is indicated by a specific number (refer to the

Programming Guide, page 4-3) flashing in the display.

• To select and start a test, press the Enter key.

• To stop a test press the Enter key again. A beep will sound and the

test number will flash in the display.

• Press the Change key to move to the next test.

• Press the Function key to leave the Diagnostics Menu.

LED Test (Menu 8, Item 1)

1. If you have not already done so, enter the Program Mode and press

the Function key until the LED Test menu

item appears in the display.

2. Press the Enter key to select and start the

test. The test number will cease to flash in the

display, and the LED indicators will illuminate

one at a time from left to right.

3. Press the Enter key to stop the test. A beep

will sound and the test number will flash in the

display.

4. Press the Change key to move to the next test

or exit the Diagnostic Menu by pressing the

Function key, or by exiting the Program Mode.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 67 68

No comments

Amano CP-5000 Operations Manual Page 57