Amano CP-5000 Operations Manual download pdf (Page 48)

6-2 CP-5000 User’s Guide

• Run the Signal Test from the Diagnostics menu to check if the

Signal relay is operating properly. If it is not, contact your local

Amano dealer.

Foreign Object or Material

Only a time card should be inserted into the unit. If foreign objects or

materials get inside the CP-5000, you must disconnect the AC power

and the battery, and remove the foreign objects.

Programming

If you suspect a programming problem, it is recommended that you

obtain a printout of the programmed information as described in

Chapter 4 and troubleshoot the programmed data, or initialize the clock

(page 2-10) to reset the unit to defaults.

If you are unable to resolve the problem, please contact your local

Amano dealer.

Key Failure

If you suspect that one of the keys has failed, you should run the Key

Test in the Diagnostics menu.

Audible Beeps

The time recorder is equipped with an audible alarm that “beeps”. The

beeps will vary in duration and corresponding meaning (see the

following).

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 67 68

No comments

Amano CP-5000 Operations Manual Page 48