Amano CP-5000 Operations Manual download pdf (Page 12)

2-4 CP-5000 User’s Guide

Wall Mounting

For proper wall mounting, follow these steps:

1. Disconnect the power cord from the power source.

2. Unlock and remove the top cover.

3. Remove the two screws on the top and slide the back plate

downward to remove it. Set the CP-5000 face up on a flat surface.

Note: The right side back plate screw also secures a ground wire.

4. Using a punch, knock out the center material from the teardrop-

shaped mounting hole on the back plate.

5. Using the back plate as a template, approximate the final location of

the clock, and mark the location of the teardrop mounting hole on the

wall.

6. Hang the back plate on a screw or anchor from the teardrop-shaped

mounting hole.

7. Level the back plate and mark the location of the bottom two

mounting holes.

8. Secure the back plate to the wall by inserting screws through the

bottom two mounting holes.

9. Holding the sides of the cover, lift the CP-5000, bottom forward, to

the back plate.

10. Align the tabs on the bottom of the CP-5000 housing with the

grooves in the bottom flange of the back plate. Hold the CP-5000 in

place so that the tabs are even with the bottom flange. Do not rest

the unit on the flange.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 67 68

No comments

Amano CP-5000 Operations Manual Page 12