Amano CP-5000 Operations Manual download pdf (Page 56)

6-10 CP-5000 User’s Guide

Wrong Color Printed

The CP-5000 has the ability to print in red or black ink. When the top

cover is installed (Normal Mode), the default ink color is black, and the

color of ink printed is determined by the settings in the Weekly Program.

When the top cover is removed (Program Mode), the CP-5000 will print

in red. If the wrong color is being printed by your CP-5000, please

perform the following:

• Obtain a print out of the programmed data from the CP-5000. Verify

that your Weekly Program settings are correct.

• The red color is active in front of the dot head. This is due to normal

interference between slider and printer carriage. Push slider to

normal position.

• Printer or printer carriage is damaged. Contact your local Amano

dealer.

• The slider on the printer carriage is not moving correctly due to a

missing black plastic bushing in the small hole of the right printer

frame. Contact your local Amano dealer.

• The ribbon cassette is not seated correctly in the printer carriage.

Reinstall the ribbon cassette.

• Printer or printer carriage is damaged. Contact your local Amano

dealer.

Weak or Light Printing

Please refer to Printing or Ribbon Error Message, Err1 section of this

chapter for troubleshooting weak or light printing problems.

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 67 68

No comments

Amano CP-5000 Operations Manual Page 56