Amano CP-5000 Operations Manual download pdf (Page 41)

CP-5000 User’s Guide 4-19

There are no programmed events for programs two and three (STP 2

or STP 3).

6. To stop printing at any time, press and hold either the Change or

Enter key. Only the currently inserted time card will be printed on,

and the remainder of the programming data will not be printed.

7. When printing is completed, the display will automatically move to

the next menu. Exit the Program Mode to Normal Mode by re-

installing the top cover.

Editing Weekly Programs

1. Obtain a printout of the current Weekly Programs.

2. Mark on the printout the desired Weekly Program that you want to

change.

3. Enter the Program Mode and press the Function key until the

Weekly Program menu item appears in the display.

4. Press and hold the Enter key until the desired program number

appears. To move to previously numbered Weekly Programs, press

and hold the Change key.

5. Change the Weekly Program as desired. For the changes to be in

saved, you must cycle through the sequence of parameters for the

program and press Enter to save your changes.

6. After saving the program, press the Function key to move to the

Program Printout menu item and print out a copy of the program to

verify your changes.

Adding Additional Weekly Programs

1. Obtain a printout of the current Weekly Programs.

2. Mark the last Weekly Program on the printout.

3. Enter the Program Mode and press the Function key until the

Weekly Program menu item appears in the display.

4. Press and hold the Enter key until an empty Weekly Program

appears in the display. The program number should be the last

program number on the printout + 1.

5. Enter the program parameters as desired. For the changes to be in

saved, you must cycle through the sequence of parameters for the

program and press Enter to save your changes.

6. After saving the program, press the Function key to move to the

Program Printout menu item and print out a copy of the program to

verify your settings.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 67 68

No comments

Amano CP-5000 Operations Manual Page 41