Amano PIX-75 Installation Manual download pdf (Page 44)

2-26 www.amano.com/time • 800-253-9836 PIX-75

Step 5. To reset the INK indicator, press and hold the ENTER button for

three (3) seconds.

Step 6. Replace the cover, and stamp a card to check the printing quality

and confirm that you have installed the ribbon cartridge properly.

Note – If the print mechanism is down (a piece of paper could not be

inserted), press the RESET button to move the carriage to the up

position. This will make the ribbon cartridge installation easier. The

Margin Selector (see Figure 6) can be moved toward the rear of

the clock to provide more clearance for ribbon replacement.

Figure 6: PIX-75 Ribbon Cradle Location.

Parts

Need Ribbons, Keys and Accessories?

Visit

www.amano.com/time

Or call 1-800-253-9836

The Amano Part number for a set of PIX-75 replacement

keys is AJR-201150

The PIX-75 ribbon cartridge in Black ink is Amano Part No. CE-315151

The PIX-75 ribbon cartridge in Red ink is Amano Part No. YK-629671

The PIX-75 ribbon cartridge in Green ink is Amano Part No. YK-629771

These ribbon cartridges are normally good for approximately 9,000

stamps, but they are supplied in sealed plastic bags to provide an

average shelf life of 2 plus years.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 57 58

No comments

Amano PIX-75 Installation Manual Page 44