Amano PIX-3000x Operations Manual

PIX-3000x Electronic Time Recorder Operation Manual

6 PIX-3000x Operations Manual Print Media Print Media is defined as the type of material you will be using in the machine to time stamp (time cards,

PIX-3000x Operations Manual 7 Print Methods There are three different Print Methods available. The default Print Method is for Paper Detect Only (P.)

8 PIX-3000x Operations Manual Specifications Power Requirements: AC 100/120/230 V ±10%, 50/60 Hz (Depending on model) Power Consumption: Normal 3W,

PIX-3000x Operations Manual 9 Chapter 2: Programming Introduction The PIX-3000x has three programming modes: Standard, Advanced, and Symbol-Signal.

10 PIX-3000x Operations Manual Front Panel Description Programming in both the Standard and Advanced modes is done through the Front Panel, which is

PIX-3000x Operations Manual 11 Standard Program Mode The Standard mode of programming consists of setting the DIP Switches on the top of the time clo

12 PIX-3000x Operations Manual Two Digit Year Printing via DIP Switch Settings Setting the corresponding DIP Switches can print the following time an

PIX-3000x Operations Manual 13 Switching the Order of Month, Date, and Year DIP Switches #7 and #8 allow you to control the order of the Month, Date,

14 PIX-3000x Operations Manual Types of Hours Hours can be displayed on the clock and printed in 12 or 24-hour format. The PIX-3000x is shipped from

PIX-3000x Operations Manual 15 Advanced Program Mode The Advanced Program mode enables you to access the programming features of the PIX-3000x throug

Proprietary Notice This document contains proprietary information and such information may not be reproduced in whole or part without the written per

16 PIX-3000x Operations Manual Manual Daylight Saving Time Adjustment The PIX-3000x has a “ONE HOUR ADJUST” mode, which enables you to manually adju

PIX-3000x Operations Manual 17 Automatic Daylight Saving Time Adjustment The PIX-3000x can be programmed to adjust for Daylight Saving Time automatic

18 PIX-3000x Operations Manual 4. The month will start flashing. Press the CHANGE button until the correct month appears in the display, then press

PIX-3000x Operations Manual 19 Hour and Minute (Time) 1. After entering the program mode, move the cursor under “HOUR, MINUTE". 2. Press ENTER

20 PIX-3000x Operations Manual Automatic Numbering Initial Number Set The PIX-3000x can automatically add a sequential number to each printout. The

PIX-3000x Operations Manual 21 Number Step Interval (Repeat Value) This selection will make the automatic number in the previous step increment or re

22 PIX-3000x Operations Manual Symbol-Signal Program Mode Accessing the Symbol-Signal Mode To enter the Symbol-Signal Mode, perform the following:

PIX-3000x Operations Manual 23 Custom Print Styles Depending on your specific application, it may be necessary for you to be able to identify each lo

24 PIX-3000x Operations Manual To program Symbol 1 or Symbol 2, perform the following: 1. With the cover removed, press the PROGRAM button. Then pr

PIX-3000x Operations Manual 25 The following is an example of programming Symbol 1 and Symbol 2: 1. Press PROGRAM button. 2. Press the SYMBOL PRINT

PIX-3000x Operations Manual i Table of Contents Chapter 1: Introduction ...1 External View...

26 PIX-3000x Operations Manual Character Table The characters listed are used to design Symbol 1 and Symbol 2. 1. The maximum displacement (print

PIX-3000x Operations Manual 27 Removing Symbols A symbol is removed by re-entering the programming mode of the symbol and entering in the “En” (End

28 PIX-3000x Operations Manual Resetting All Data to Default Values In the event the PIX-3000x needs to be reprogrammed, or errors are made during th

PIX-3000x Operations Manual 29 Chapter 3: Maintenance To prevent damage to the PIX-3000x, it is recommended to only use paper type media. Special ca

30 PIX-3000x Operations Manual Extending the Ribbon Life The PIX-3000x has a ribbon life extender lever, which will prolong the use of the ribbon unt

PIX-3000x Operations Manual 31 Replacing the Ribbon Removal 1. Remove the cover. 2. Looking at the right hand side of the machine, pull the two ca

32 PIX-3000x Operations Manual

ii PIX-3000x Operations Manual Accessing the Symbol-Signal Mode...22 Definitions...

AJR-187601 Copyright © 2005 Amano Cincinnati, Inc. Printed in USA 5/05/0

PIX-3000x Operations Manual 1 Chapter 1: Introduction External View Components • Key • This Manual

2 PIX-3000x Operations Manual Removing the Cover Insert and turn the key clockwise to remove the cover. Removing the Packing Material Lift up the

PIX-3000x Operations Manual 3 Connecting the Battery 1. Connect the battery cable (the connector with the black and red wires) into connector CN3.

4 PIX-3000x Operations Manual Wall Mounting 1. With the cover removed, the wall mount plate can be removed by using your index finger as shown below

PIX-3000x Operations Manual 5 Your First Printout Please verify the following before attempting to print: 1. Is all the packaging material removed